Paver cleaning and re-sanding across Canberra & ACT: hot water, detergents mixed to suit and a whirlaway cleaner lift dirt, moss and stains from tired paving.
For a free quote, call 0433 874 579 or use the quote form.
Add To Cart
Paver cleaning and re-sanding that gives tired paving a second life.
Pavers dull little by little - dirt, moss and stains build up so
slowly you do not notice until the paving has lost its look.
Clear Jet generates its own hot water and mixes specific detergents
to the strength required, then cleans with the whirlaway paving
cleaner, which minimises mess and splash while cleaning deep below
the surface.
The right method for the pavers
Brick, concrete and natural stone pavers
No matter which pavers you have, where they are or what pattern
they are laid in, the method is matched to the paver type and its
condition.
Once the pavers are clean, joints can be re-sanded and a sealer can
be applied to help protect them for longer.
Paver cleaning service
What’s included
Surface assessment of paver type and condition
Hot water with detergents mixed to the right strength
Whirlaway clean for an even, low-splash finish
Edges, steps and corners detailed
Re-sanding and sealing on request
A controlled clean from start to finish
Our paver cleaning process
1
Inspect
We check the pavers, joints, staining and drainage.
2
Pre-treat
Detergents are mixed to the strength the buildup needs.
3
Whirlaway clean
Hot water and the whirlaway clean deep with less splash.
4
Detail
Edges, steps and corners are finished carefully.
5
Re-sand or seal
Joints can be re-sanded and a sealer applied if requested.
Real Clear Jet work
Paving across Canberra
Paved areas after a Clear Jet clean, photographed on the job in
Canberra and the ACT.
Paver side path after cleaningHerringbone paver driveway after cleaningCourtyard pavers after cleaning
More real results
More paver cleaning results
Two more paver cleaning jobs, photographed before and after.
Drag the slider to see the before and after
BEFOREAFTER
Herringbone clay paver driveway, before and after cleaning (Canberra)
BEFOREAFTER
Square courtyard pavers, before and after cleaning (Canberra)
Before and after photos
Side path pavers
Moss cleared from the joints of a paver side path. The before and after photos were taken from opposite ends of the path.
Before
After
Side path pavers: moss cleared from the joints (Canberra)
Customer feedback
What Canberra clients say
★★★★★
“CLEAR JET has provided me with a service I never thought possible They arrived ON TIME, they were PUNCTUAL & they delivered EXACTLY what was promised.”
Robert · Kaleen
★★★★★
“Environmental preservation aside, the team at CLEAR JET gave us a level of service we only ever dreamed of. They were simply a joy to deal with.”
Karen · Gordon
★★★★★
“Tradesmen with the right Attitude.”
Jonathon · Gungahlin
Paver cleaning questions
Frequently asked questions
Will cleaning wash the sand out of the joints?
Some joint sand can be lost during a deep clean, which is why
re-sanding is available once the pavers are clean.
Can you clean pavers around the pool?
Yes. Brick pavers around the pool can be cleaned, and sealing can
be discussed once they are clean.
Should I seal my pavers after cleaning?
Sealing helps protect pavers for longer. We can explain the
options after the clean.
Can every stain be removed?
Many stains respond well to hot water and detergent. Some older
or deeply soaked stains may leave a shadow, and we will set
expectations after inspecting them.
Do I need to be home?
Not always. If access, water supply and the agreed area are
confirmed, we can discuss completing the job while you are away.
Clear quote · No obligation
Ready to give your pavers a second life?
Tell us your Canberra suburb, the paver type and approximate area.
We’ll come back with a clear next step.
Before
After